VC 10 pro

You Are Here:

»Home »Products » VC 10 pro

VC 10 pro

Valve-controlled, universal vacuum controller for controlled evacuation of air (gas) from laboratory equipment, as well as for classical separation, filtration or drying tasks in the laboratory. The controller is ready-to-use in numerous applications and can be easily installed.

VC 10 pro can be used with all standard vacuum sources. The use of multiple controllers with one vacuum source is possible.


  • On/off regulation of multiple vacuum sources
  • Automatic boiling point detection
  • Integrated solvent library: Helps to set the correct parameters for example in evaporation processes with rotary evaporators
  • Graph function
  • Connection for external temperature sensor: temperature value is shown on display
  • Valve cleaning function for long service life
  • Integrated ventilation valve for simple pressure equalization and aeration with inert gas after process completion
  • VENT short key button allows pressure equalization during a running process
  • Program function: up to ten user-defined programs can be saved, with up to ten pressure/time sequences
  • USB / RS232 interfaces for connection with the laboratory software labworldsoft®
  • Electronic control system for improved process efficiency and higher solvent recovery rate
  • High energy efficiency thanks to device-to-device communication (vacuum controller to recirculating chiller)

For additional safety for users and environment, the use of the VSE 1 vacuum safety emission condenser is recommended, which prevents solvents from being released into the room air. The VSE 1 is available as an accessory.


Technical Data

Connection diameter suction side 8 mm
Connection diameter pressure side 8 mm
Connection diameter venting side 8 mm
Input pressure 1 - 1050 mbar
Boiling point detection yes
Solvent library yes
Two-point control yes
Analog speed vacuum control yes
Display TFT
Pressure unit / scale mbar, hPa, mmHg, Torr
Vacuum sensor yes
Vacuum sensor type ceramic Al2O3
Pressure max. for pressure sensor 1.6 bar
Measurement range (absolute) 1 - 1100 mbar
Control range 1 - 1100 mbar
Resolution pressure 1 mbar
Measurement uncertainty 1 mbar
Medium temperature (gas) 5 - 40 °C
Vacuum valve yes
Venting valve yes
Connection for ext. temperature sensor PT1000
Temperature unit °C / °F
Temperature measuring range -10 - 200 °C
Temperature measurement resolution 1 K
Accuracy of temperature measurement ±1 K
Timer yes
Time setting min. 1 s
Time setting max. 6000 min
Vacuum speed control interface VACSTAR
Material in contact with medium Al2O3, PTFE, FPM, PPS
Housing material PBT
Fastening stand / clamp
Fastening diameter 16 mm
Mode automatic yes
Mode manual yes
Mode pump % yes
Mode program yes
Graph function yes
Chiller control yes
Vacuum leakage test yes
Dimensions (W x H x D) 95 x 150 x 110 mm
Weight 1.5 kg
Permissible ambient temperature 5 - 40 °C
Permissible relative humidity 80 %
Protection class according to DIN EN 60529 IP 20
RS 232 interface yes
USB interface yes
Voltage 100 - 240 V
Frequency 50/60 Hz
Power input 24 W
Power input standby 2 W
DC Voltage 24 V=
Current consumption 1000 mA